高效运行，精准封边，操作简单，为您的生产节奏提供有力支持。选择KDT极东机械封边机，让效率与品质同行，为家具增添更精致的质感。
Efficient operation, precise edge banding, and simple controls — all working together to support your production rhythm. Choose KDT edge banding machines to bring efficiency and quality together, adding a refined touch to every piece of furniture.
封边到位 品质自现 压梁自动定位
Pressure Beam With Auto Adjustment
快速切换加工不同厚度的板件，减少调机时间，提高效率。
Precise & quick adjustment according to workpiece thickness, reducing adjustment time and improving efficiency.
预铣机构
Pre-Milling Unit
采用双铣刀对开料产生的波纹痕迹、毛刺或不垂直等现象进行修饰，使封边条与板材的贴合更加紧密，整体性和美观度更佳。
Double milling cutters are used to modify corrugated marks, burrs or non-vertical phenomena caused by the cutting material, so that the edge seal strips fit closer to the board, and the integrity and aesthetics are better.
预热装置
Pre-Heating Unit
预热板件，提升板材与边带的粘合效果。
Panel preheats to improve a better adhesiveness between panel and tapes.
双色PUR上熔胶+上熔胶系统
PUR+Pre-Melt Glueing System
快速切换EVA、PUR多种颜色胶水。
EVA and PUR glueing can quickly and flexibly change.
双五轮压贴
Five-Wheel Pressing
强力压合边带，提升板材粘合效果
Strong pressure improves adhesiveness.
齐头机构
End-Cutting Unit
通过精密的直线导轨运动，快速切断板材前后多余边带,确保切断面平整光滑。
Motions along the precision linear guides, quickly cut off the excess edge at front and rear of the panel to ensure a smooth cut surface.
修边机构
Trimming Unit
将突出于木板上下表面多余边带切除，使封边带上下边缘与木板的上下表面平齐。
Remove the excess tape from surfaces of the board, make sure edging is flush.
仿形跟踪修边
Corner Rounding
实现多种更美观的圆弧修边工艺。
Realizes various profile trimming.
刮边机构
Scraping Unit
消除修边非直线运动切削过程引起的波纹痕迹，使板材上下部分更加光滑整洁。
Trim off the tools marks, ensuring the best edging quality.
柔性平刮边
Flexible Flat Scraping
自适应式平刮边，柔性靠模紧密贴合板材，封边更完美。
Self-adapted flat scraping unit ensures workpiece fits tightly for better edging performance.
双往复式抛光
Double Reciprocating Buffering
棉质抛光轮往复式清洁封边后的板件，清除板件上下面的余胶和碎屑。
Cotton polishing wheel reciprocatingly cleans the plates after the edge seal, and removes residual glue and debris on and below the plates.
脱模清洁
Spray and Clean Unit
可在待封边的板件上下面喷一层脱模剂，有效防止封边过程中溢出的热熔胶粘染板面。
Spraying on the top and bottom of the panel effectivelyprevents the hot-melt glue from being left on.
板材上下表面喷涂清洁剂，配合抛光机构清洁板材上下面的余胶和碎屑。
Apply the cleaning agent on top & bottom of workpiece toperfectly work with buffing units for clean and best finishingresults.
视频赏析
技术参数
