文章由上海程斯智能科技有限公司提供技术咨询和服务
纱线动态摩擦系数测定仪（Yarn Dynamic Friction Coefficient Tester）
执行标准:
FZ/T 50025-2014
FZ/T50063-2023
JISL 1095-1979《纱线摩擦系数的测定》
ASTM D 3108-2001《纱线与固体材料之间摩擦系数的标准试验方法》
ASTM D 3412-2001《纱线与纱线之间摩擦系数的标准试验方法》
FZ 01058
ZBW 04005-89
Execution Standard:
FZ/T 50025-2014
FZ/T50063-2023
JISL 1095-1979 "Determination of Friction Coefficient of Yarn"
ASTM D 3108-2001 "Standard Test Method for Friction Coefficient between Yarn and Solid Materials"
ASTM D 3412-2001 "Standard Test Method for Friction Coefficient between Yarns"
FZ 01058
ZBW 04005-89
技术参数:
控制系统：PLC；
『操作界面』：彩色7寸『触摸屏』；
测力范围及精度：0～500CN，精度±1%FS；
摩擦系数范围：0<u<1；
摩擦角可调范围：0度～360度；
驱动模式：伺服电机+减速器+驱动器，稳定性好，所用寿命长；
预张力范围：0～50CN；
纱线测试速度：1m/min～110m/min，可任意在『触摸屏』上设置；
固定支架：不锈钢制作1套；
显示内容：速度、预张力、摩擦系数；
电源、功率： AC220V 50Hz 300W；
外形尺寸约：472*400*720mm；
Technical Parameters:
Control system: PLC;
Operating interface: 7-inch color touch screen;
Measurement range and accuracy: 0-500CN, accuracy ± 1% FS;
Friction coefficient range: 0<u<1;
Adjustable range of friction angle: 0 degrees to 360 degrees;
Drive mode: servo motor+reducer+driver, with good stability and long service life;
Pre tension range: 0-50CN;
Yarn testing speed: 1m/min~110m/min, can be set freely on the touch screen;
Fixed bracket: 1 set made of stainless steel;
Display content: speed, pre tension, friction coefficient;
Power supply and output: AC220V 50Hz 300W;
Dimensions approximately: 472 * 400 * 720mm;
用途:
纱线动态摩擦系数测定仪用于测定纱线的摩擦特性，适应于化纤长丝及其它材料纱线的动态摩擦系数的测定，亦可用于皮辊等纺织器材的摩擦系数测定，是评价长丝及纺织器材摩擦系数等必不可少的测试仪器。
Purpose:
The yarn dynamic friction coefficient tester is used to measure the friction characteristics of yarn, suitable for measuring the dynamic friction coefficient of synthetic filament and other material yarns, and can also be used for measuring the friction coefficient of textile equipment such as rollers. It is an essential testing instrument for evaluating the friction coefficient of filament and textile equipment.
优点:
1、采用绞盘法(RoLor法)测试机理。
2、直流电机作等速引力源。
3、气动式残纱处理。
4、微机控制、自动数据处理。
Advantages:
1. Use the winch method (RoLor method) to test the mechanism.
2. DC motor serves as a constant velocity gravitational source.
3. Pneumatic residual yarn treatment.
4. Microcomputer control and automatic data processing.
配置清单:
主机1台；
测试软件1套；
说明书1份;
合格证1份;
保修卡1份;
签收单1份;
铭牌1块;
电源线1根;
扳手1套;
宣传册若干;
固定支架：不锈钢制作1套；
Configuration List:
1 host;
1 set of testing software;
1 copy of instruction manual;
1 certificate of conformity;
1 warranty card;
One copy of the delivery receipt;
1 nameplate;
1 power cord;
1 set of wrench;
Several brochures;
Fixed bracket: 1 set made of stainless steel;
